Official website

Doména gov.sk je oficálna

Toto je oficiálna webová stránka orgánu verejnej moci Slovenskej republiky. Oficiálne stránky využívajú najmä doménu gov.sk. Odkazy na jednotlivé webové sídla orgánov verejnej moci nájdete na tomto odkaze.

This page is secured

Buďte pozorní a vždy sa uistite, že zdieľate informácie iba cez zabezpečenú webovú stránku verejnej správy SR. Zabezpečená stránka vždy začína https:// pred názvom domény webového sídla.

  1. Home
  2. STN EN 13016-1

STN EN 13016-1

Back

Electronic version (pdc file)

Add to Cart
Name: STN EN 13016-1
Validity: Valid
Number of pages: 17
Language:
EN
Paper: 14,10€
Electronic version a) Only read (without ability to print and copy) 12,69€
b) Without ability to print, with ability to copy (printscreen) 14,10€
c) With ability to print and copy (printscreen) 18,33€
Slovak title Kvapalné ropné výrobky. Tlak pár. Časť 1: Určovanie tlaku pár pri nasýtení vzduchom (ASVP) a výpočet ekvivalentu tlaku suchých pár (DVPE)
English title Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
Release Date: 01. 10. 2018
Date of withdrawal: 01. 09. 2024
ICS: 75.160.20
Sorting character/National clasification code 65 6083
Level of incorporation: idt EN 13016-1:2018
Official Journal 09/18
Amendments
Replaced by: STN EN 13016-1:2024-09 (65 6083)
Repleces: STN EN 13016-1:2008-03 (65 6083)
Note in Official Journal:
Subject of the standard: This European Standard specifies a method for the determination of the air saturated vapour pressure (ASVP) (total vapour pressure), exerted in vacuo, by volatile, low viscosity petroleum products, components, ethanol blends up to 85 % (V/V), and feedstocks containing air. A dry vapour pressure equivalent (DVPE) can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1 and a test temperature of 37,8 °C. The equipment is not wetted with water during the test, and the method described is therefore suitable for testing samples with or without oxygenates; no account is taken of dissolved water in the sample. This method described is suitable for testing air saturated samples with a DVPE between 15,5 kPa and 106,0 kPa; vapour pressures outside this range can be measured but the precision has not been determined. This document is applicable to fuels containing oxygenated compounds up to the ...
Preview: Náhľad normy (PDF)