STN EN IEC 61238-1-3
| Name: | STN EN IEC 61238-1-3 |
| Validity: | Valid |
| Number of pages: | 52 |
| Language: |
EN
|
| Paper: | 21,40€ |
| Electronic version |
a) Only read (without ability to print and copy)
19,26€ b) Without ability to print, with ability to copy (printscreen) 21,40€ c) With ability to print and copy (printscreen) 27,82€ |
| Slovak title | Lisovacie a skrutkové konektory na silnoprúdové káble. Časť 1-3: Skúšobné metódy a požiadavky na lisovacie a skrutkové konektory na silnoprúdové káble na menovité napätia nad 1 kV (Um = 1,2 kV) do 36 kV (Um = 42 kV) skúšané na neizolovaných vodičoch |
| English title | Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated conductors |
| Release Date: | 01. 02. 2020 |
| Date of withdrawal: | |
| ICS: | 29.060.20 |
| Sorting character/National clasification code | 34 7405 |
| Level of incorporation: | idt IEC 61238-1-3:2018, idt EN IEC 61238-1-3:2019 |
| Official Journal | 01/20 |
| Amendments | Zmena A11 V 03/20 |
| Replaced by: | |
| Repleces: | STN EN 61238-1:2004-04 (34 7405) |
| Note in Official Journal: | |
| Subject of the standard: | IEC 61238-1-3:2018 applies to compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV), for example buried cables or cables installed in buildings, having a) conductors complying with IEC 60228 having nominal cross-sectional areas between 2,5 mm2 and 1 200 mm2 for copper and between 16 mm2 and 1 200 mm2 for aluminium, excluding Milliken conductors; b) a maximum continuous conductor temperature not exceeding 90 °C. This document is not applicable to connectors for overhead line conductors nor to connectors with a sliding contact. The object of this document is to define the type test methods and requirements which apply to compression and mechanical connectors for power cables with copper or aluminium conductors. The reference method is to perform the tests on unused conductors. |
| Preview: | Náhľad normy (PDF) |