STN EN 12285-1
| Name: | STN EN 12285-1 |
| Validity: | Withdrawn |
| Number of pages: | 120 |
| Language: |
EN
|
| Paper: | 35,00€ |
| Electronic version |
a) Only read (without ability to print and copy)
31,50€ b) Without ability to print, with ability to copy (printscreen) 35,00€ c) With ability to print and copy (printscreen) 45,50€ |
| Slovak title | Dielensky vyrábané oceľové nádrže. Časť 1: Horizontálne valcové jednoplášťové a dvojplášťové nádrže na podzemné uskladňovanie horľavých a nehorľavých kvapalín znečisťujúcich vodu, ktoré neslúžia na vykurovanie a chladenie budov |
| English title | Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings |
| Release Date: | 01. 01. 2019 |
| Date of withdrawal: | 01. 08. 2019 |
| ICS: | 13.300, 23.020.10 |
| Sorting character/National clasification code | 69 8047 |
| Level of incorporation: | idt EN 12285-1:2018 |
| Official Journal | 12/18 |
| Amendments | |
| Replaced by: | STN EN 12285-1:2019-08 (69 8047) |
| Repleces: | STN EN 12285-1:2004-08 (69 8047) |
| Note in Official Journal: | |
| Subject of the standard: | This document specifies the product characteristics and test methods for workshop fabricated cylindrical, horizontal steel tanks, single (type S) and double skin (type D) intended to be used for the underground storage of water polluting liquids (both flammable and non-flammable) and installed in industrial processes or in petrol stations at normal ambient temperature conditions (-20 °C to +50 °C) within the following limits: - from 800 mm up to 3 000 mm nominal diameter and; - up to a maximum overall length of 6 times the nominal diameter; - with an operating pressure (Po) of maximum 50 kPa (0,5 bar(g)) and minimum – 5 kPa (–50 mbar(g)) and; - for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not exceed 5 × 10-3 m2/s. Tanks designed to this standard allow for an earth cover of up to 1,5 m. If there are imposed traffic loads or a greater earth cover, calculation is expected to be carried out. |
| Preview: | Náhľad normy (PDF) |